CH-6855 Stabio
Switzerland
During its digital event ““WEX 2021 – the Web Exhibition”, ST BlowMoulding has presented its Dual head blow moulding machine ISIT 1320, this machine should have been exhibited at NPE 2021 Exhibition in Orlando.
Dual Head blow moulding machines are widely diffuse onthe US market due to the highest production volume required.
With this latest project, ISIT 1320 Dual Head, STBlowMoulding has introduced several features that boosted the functionality of this machine type.
Each head has a top blow device, the most straightforward alternative to a bottom blow stand.
Heads are adjustable side to side, and their center distance is variable to fit asymmetric cavities and minimize flash. Take-out pliers have been designed with pneumatic compensation in order to prevent arms deflection.
The machine is supplied with a removable static access cage for an ergonomic die and core changeover. Moreover, the operator is aided by a swing arm to support the tooling weight during maneuvers.
On ISIT 1320 Dual Head, a significant energy saving is achieved with an innovative hydraulic power pack equipped with a pre-filling cylinder and variable speed pumps that minimize the energy needed for clamping and motion.
(en)During its digital event ““WEX 2021 – the Web Exhibition”, ST BlowMoulding has presented its Dual head blow moulding machine ISIT 1320, this machine should have been exhibited at NPE 2021 Exhibition in Orlando.
Dual Head blow moulding machines are widely diffuse onthe US market due to the highest production volume required.
With this latest project, ISIT 1320 Dual Head, STBlowMoulding has introduced several features that boosted the functionality of this machine type.
Each head has a top blow device, the most straightforward alternative to a bottom blow stand.
Heads are adjustable side to side, and their center distance is variable to fit asymmetric cavities and minimize flash. Take-out pliers have been designed with pneumatic compensation in order to prevent arms deflection.
The machine is supplied with a removable static access cage for an ergonomic die and core changeover. Moreover, the operator is aided by a swing arm to support the tooling weight during maneuvers.
On ISIT 1320 Dual Head, a significant energy saving is achieved with an innovative hydraulic power pack equipped with a pre-filling cylinder and variable speed pumps that minimize the energy needed for clamping and motion.
(de)Während seiner digitalen Veranstaltung „WEX 2021 – the Web EXhibition“ hat ST BlowMoulding seine Doppelkopf-Blasformmaschine ISIT 1320 vorgestellt. Diese Maschine hätte auf der NPE 2021 Exhibition in Orlando ausgestellt werden sollen.
Doppelkopf-Blasformmaschinen sind auf dem US-Marktaufgrund des höchsten erforderlichen Produktionsvolumens weit verbreitet.
Mit diesem neuesten Projekt, ISIT 1320 Dual Head, hat ST BlowMoulding mehrere Funktionen eingeführt, die die Funktionalität dieses Maschinentyps verbessert haben.
Jeder Kopf verfügt über eine Aufblasvorrichtung, die einfachste Alternative zu einem Unterblasständer.
Die Köpfe sind von Seite zu Seite verstellbar und ihr Mittenabstand ist variabel, um asymmetrische Kavitäten anzupassen und Blitze zu minimieren.
Entnahmezangen wurden mit pneumatischem Ausgleich konstruiert,um eine Auslenkung der Arme zu verhindern.
Die Maschine wird mit einem abnehmbaren statischen Zugangskäfig für einen ergonomischen Werkzeug- und Kernwechsel geliefert. Darüber hinaus wird der Bediener durch einen Schwenkarm unterstützt, um das Werkzeuggewicht während der Manöver zu stützen.
Beim ISIT 1320 Dual Head wird eine erhebliche Energieeinsparung durch ein innovatives Hydraulikaggregat mit Vorfüllzylinderund drehzahlgeregelten Pumpen erreicht, die den Energiebedarf für Klemmung und Bewegung minimieren.