CH-6855 Stabio
Switzerland
Nuova soffiatrice ad estrusione continua per fusti L-ring a tre strati da 220 litri.
La nuova soffiatrice ad estrusione continua ECT 880 CoEx3 di ST BlowMoulding sarà la più grande macchina nel padiglione del soffiaggio al K 2019. È progettata per produrre fusti L-ring da220 litri e fusti open-top fino a 50 fusti all'ora.
Rispetto ad una tradizionale soffiatrice a testa ad accumulo, la macchina ad estrusione continua ECT 880garantisce un tempo di ciclo più rapido del 10%, una migliore qualità dello spessore delle pareti e un enorme risparmio energetico.
La configurazione a tre strati(strato interno e strato esterno: dal 10% al 25% ciascuno; strato intermedio:dal 50% all'80%) ha lo scopo di assegnare una caratteristica specifica a ciascun livello (ad esempio materiale ad alta purezza nello strato interno, materiale rimacinato nello strato intermedio, additivo antistatico nello strato esterno).
Dotata di estrusori HEX ad alta efficienza, testa di estrusione W. MüllerReCo3 e unità di controllo di spessore radiale PWDS® / SFDR® di Feuerherm, questa macchina rafforzerà la presenza di ST BlowMoulding nel settore dell'imballaggio industriale dopo il recente successo delle macchine IBC da 1000 litri.
La soffiatrice è dotata di specifici dispositivi per il cambio sicuro dei componenti della testa: un verricello elettrico per sollevare maschio e filiera, un braccio orientabile regolabile per allinearli alla testa di estrusione e una passerella mobile che sporge dal mezzanino della macchina per lavorare sotto la testa di estrusione.
La macchina tornerà in ST BlowMoulding dopo la fiera K per essere personalizzata in base ai requisiti specifici di AST Kunststoffverarbeitung, uno dei maggiori produttori tedeschi di imballaggi industriali in plastica.
Nuova soffiatrice con aspirazione del parison per condotti aria 3D.
La leadership di ST BlowMoulding nelle tecnologie di soffiaggio con aspirazione del parison è testimoniata dalla nuova ASPI 200 in mostra durante il K 2019 presso la struttura Dr. Reinold Hagen Stiftung di Bonn.
Dr. Reinold Hagen Stiftung è una delle più importanti fondazioni indipendenti nel settore delle materie plastiche, delle tecnologie e dell'ingegneria meccanica in Germania e tiene lezioni di istruzione e formazione professionale.
La nuova ASPI 200 - consegnata pochi mesi fa – è fornita di tutte le innovazioni più recenti sviluppate da ST BlowMoulding nella tecnologia del soffiaggio con aspirazione del parison: il nuovissimo HMI (intuitivo come uno smartphone), il W-Print(per stampare dati direttamente sul parison) e il monitoraggio dello swell del parison (per tenere sotto controllo la ripetibilità del processo).
Per i visitatori interessati a conoscere meglio questa tecnologia in poco tempo, ST BlowMoulding e Dr. Reinold Hagen Stiftung hanno organizzato un servizio navetta dal quartiere fieristico K alla struttura della fondazione, dove l'ASPI 200 sarà operativa con uno stampo 3D.
Sia la macchina ECT 880 CoEx3 che la macchina ASPI 200 esibiranno il nuovo logo aziendale e la nuova sgargiante livrea delle macchine ST BlowMoulding. Il nuovo claim “Moving Forward, by YourSide" esprime la costante tensione all’innovazione dell’azienda per trovare soluzioni in linea con le esigenze dei clienti.
(en)New three-layer continuous extrusion blow moulding machine for 220-liter L-ring drums
The new three-layer continuous extrusion blow moulding machine ECT 880 CoEx3 by ST BlowMoulding will be the biggest machine exhibited at K 2019 in the blow moulding hall 14.It is designed to produce 220-liter L-ring drums and open-head drums up to 50 pieces per hour.
Compared to a traditional accumulator-head blow moulding machine, the ECT 880 continuous extrusion machine performs 10%faster cycle time, improved wall thickness quality and huge energy saving.
The three-layer configuration (inner layer and outer layer: 10% to 25% each one; middle layer: 50% to 80%) is intended to assign a specific feature to each layer (for instance high purity material in the inner layer, regrind material in the middle layer, antistatic additive in the outer layer).
Equipped with high-efficiency HEX extruders, W. Müller ReCo3 extrusion head and PWDS®/SFDR® radial control unit by Feuerherm, this machine will strengthen the position of ST BlowMoulding in the industrial packaging sector after the recent success of the 1000-liter IBC machines.
Specific devices have been included for safe head tooling changeovers: an electric hoist to raise the core and die, an adjustable swivel arm to align them with the extrusion head, and a movable catwalk protruding from the machine mezzanine to work under the extrusion head.
The machine will be shipped back to ST BlowMoulding after the K exhibition, to be customized according to the specific requirements of AST Kunststoffverarbeitung, one of the largest German manufacturer of industrial plastic packaging.
New parison suction blow moulding machine for 3D ducts
The leadership of ST BlowMoulding in parison suction blow moulding technologies is witnessed during K 2019 by the new ASPI 200 on display at Dr. Reinold Hagen Stiftung facility in Bonn.
The Dr. Reinold Hagen Stiftung is one of the largest independent foundations in the field of plastic materials, technologies and mechanical engineering in Germany and holds lectureships in education and professional training.
The new ASPI 200 – delivered just few months ago – includes all most recent developments by ST BlowMoulding in suction blow moulding technology: the brand new HMI (as user friendly as a smartphone), the W-Print (to mark data directly on the parison) and the parison swell monitoring system (to keep process repeatability under control).
For those visitors who want to get familiar with all that technology at a single glance, STBlowMoulding and Dr. Reinold Hagen Stiftung have organized a shuttle service from the K fairground to the foundation facility, where the ASPI 200 will be in operation with a 3D mould.
Both the ECT 880 CoEx3 machine and the ASPI 200 machine will display the new company logo and the new striking machine livery of ST BlowMoulding. The new company claim “Moving Forward, by Your Side” expresses ST BlowMoulding’s constant inspiration to innovate and find solutions tuned to the customers’ needs.
(de)Neue Blasformmaschine mit kontinuierlicher 3-Schicht Extrusion für 220 Liter L-Ring Fässer
Die Blasformmaschine ECT 880 CoEx3 von ST BlowMoulding ist die größte Maschine, die auf der K 2019 in der Blasformhalle 14 ausgestellt wird.
Sie ist für die Produktion von 220 Liter L-Ring und Open-Top Fässern mit bis zu 50 Stück pro Stunde ausgelegt.
Im Vergleich zu einer herkömmlichen Akkumulatorkopf-Blasformmaschine bietet die kontinuierliche 3-Schicht-Maschine ECT 880 eine um 10% kürzere Zykluszeit, eine verbesserte Wanddickenqualität und eine enorme Energieeinsparung.
Die 3-Schicht-Konfiguration (innere Schicht und äußere Schicht: jeweils 10% bis 25%; mittlere Schicht: 50% bis 80%) soll jeder Schicht ein spezifisches Merkmal zuweisen (zum Beispiel hochreines Material in der inneren Schicht, Regenerat in der Mittelschicht, Antistatikadditiv in der Außenschicht).
Ausgestattet mit hocheffizienten HEX-Extrudern, einem W. Müller ReCo3-Extrusionskopf und der PWDS® / SFDR®-Radialsteuerung von Feuerherm, stärkt diese Maschine nach dem jüngsten Erfolg der 1000 Liter IBC-Maschinen die Position von ST BlowMoulding im Bereich der Industrieverpackungen.
Für den sicheren Wechsel von Kopfwerkzeugen wurden spezielle Vorrichtungen eingebaut: eine elektrische Winde zum Anheben des Kerns und der Düse, ein einstellbarer Schwenkarm zum Ausrichten der Werkzeuge am Extrusionskopf und ein ausfahrbarer Laufsteg, der aus der Zwischenetage der Maschine herausragt und das Arbeiten unter dem Extrusionskopf ermöglicht.
Nach der K-Messe wird die Maschine an ST BlowMoulding zurückgesandt und an die spezifischen Anforderungen von AST Kunststoffverarbeitung, einem der größten deutschen Hersteller von industriellen Kunststoffverpackungen, angepasst.
Neue Saugblasformmaschine für 3D-Kanäle
Die Führungsposition von ST BlowMoulding im Bereich der Saugblasformtechnik wird auf der K 2019 durch die neue ASPI 200 untermauert, welche im Technikum der Dr. Reinold Hagen Stiftung in Bonn ausgestellt wird. Die Dr. Reinold Hagen Stiftung ist eine der größten unabhängigen Stiftungen im Bereich der Kunststofftechnologien und des Maschinenbaus mit Lehr- und Fortbildungsauftrag in Deutschland.
Die vor wenigen Monaten ausgelieferte ASPI 200 zeigt die neuesten Entwicklungen von ST BlowMoulding im Bereich der Saugblasformtechnik, wie z.B.: die brandneue Bedienoberfläche (so benutzerfreundlich wie ein Smartphone), den W-Print Schlauchmarkierer (zum aufbringen von Daten direkt auf dem Vorformling) und das System zur Überwachung des Quellenverhaltens des Vorformlings (zum Kontrollieren der Prozessstabilität).
Für interessierte Messebesucher, die beide Maschinen auf einmal sehen wollen, haben ST BlowMoulding und die Dr. Reinold Hagen Stiftung einen Shuttleservice vom K-Messegelände zum Technikum organisiert, wo die Technology der ASPI 200 live bei der Produktion mit einem 3D-Formwerkzeug begutachtet werden kann.
Sowohl die ECT 880 CoEx3 als auch die ASPI 200 werden das neue Firmenlogo und die neue auffällige Maschinenlackierung von ST BlowMoulding tragen. Das neue Unternehmensmotto „Moving Forward, by Your Side“ ist Ausdruck des ständigen Bestrebens von ST BlowMoulding, innovative Lösungen zu finden, die auf die Bedürfnisse der Kunden abgestimmt sind.